 |
|
 BOOST™ is the newest blend in the family of enhanced Calcium Chlorides.
A superb combination, with the melting power of Calcium Chloride coupled with the performance enhancement and corrosion protection
of the organic inhibitor BOOST™
is designed to perform where other chlorides fall short.
 PRE-WETTING
• Enhances the de-icing properties of dry materials. • Reduces bounce and scatter losses during application from a 30% loss down to only a 4% loss. • Reduces material needed for effectiveness. ANTI-ICING
• Application rates start as low as 8-15 GLPM. • Stream apply. Do not fan spray or mist. • Begin application when the pavement temperature is expected to drop to 32 F or below, ideally as precipitation is beginning. • Easy to see when applied. DE-ICING
• Stream apply. Do not fan spray or mist. • Allow to penetrate accumulation, then plow as usual. • Burns through hardpack to spread along pavement. • Makes removal easier–breaks bonded ice and snow from the roadway. • Snow/ice start thawing immediately–no sunshine needed. • No dust-causing abrasives needed. Lower eutectic performance
• A freeze point that starts out at -52F. • A freeze curve with superior melting capacity. Product consistency
• No Carnallite of Gypsum fallout. • Manufactured under strictly controlled plant conditions. • Smooth, blended product time after time. Ready to use product
• No mixing dry materials before use. • Little or no agitation required. • Will not stratify in tank. Lower application rates
• Up to 30% MORE melting concentration than other materials. An excellent choice for bridge systems and fixed
systems
• Won’t clog orifices.
|
America West Environmental | 3300 E. A Street | Pasco, WA 99301
| (509) 547-2797 phone | (509) 547-7861 fax | americawest@prodigy.net | Sitemap
